請教各位以下產品如何做.
條件:
1》50HZ-1KHZ
2》L值:1H MIN
3》CORE:矽銅片H材或Z11
4》BOBBIN:6個PIN,繞線為PIN1,3為起始腳,PIN4,6為結束腳.
5》WIRE:0.07線雙線并繞
6》產品型號為EE16-640HM
7》PIN腳長19MM,PIN間距2.5MM,PIN腳直徑為0.5MM
求助大俠!!
全部回復(2)
正序查看
倒序查看
還有一些電器要求:
1》PRI SOURCE IMPEDANCE: 600 OHM CT
2》SEC LOAD IMPEDANCE: 600 OHM CT
3》PRI DC CURRENT :3 mA MAX
4》OPEROTING LEVEL:50mW MAX 300HZ
5》FREQUENCY RESPONSE(RELATIVE TO 1 KHZ):+/-2.0 dB 300HZ--1KHZ
6》LONGITUDINAL BALANCE:60dB MIN 1KHZ
7DC RESISTANCE:(1--3)70 OHM+/-20% (4-6)95 OHM+/-20%
1》PRI SOURCE IMPEDANCE: 600 OHM CT
2》SEC LOAD IMPEDANCE: 600 OHM CT
3》PRI DC CURRENT :3 mA MAX
4》OPEROTING LEVEL:50mW MAX 300HZ
5》FREQUENCY RESPONSE(RELATIVE TO 1 KHZ):+/-2.0 dB 300HZ--1KHZ
6》LONGITUDINAL BALANCE:60dB MIN 1KHZ
7DC RESISTANCE:(1--3)70 OHM+/-20% (4-6)95 OHM+/-20%
0
回復
@bennychan
還有一些電器要求:1》PRISOURCEIMPEDANCE:600OHMCT2》SECLOADIMPEDANCE: 600OHMCT3》PRIDCCURRENT:3mAMAX4》OPEROTINGLEVEL:50mWMAX 300HZ5》FREQUENCYRESPONSE(RELATIVETO1KHZ):+/-2.0dB300HZ--1KHZ6》LONGITUDINALBALANCE:60dBMIN 1KHZ7DCRESISTANCE:(1--3)70OHM+/-20%(4-6)95OHM+/-20%
怎么沒有人頂???
大俠們,請幫幫手!!
大俠們,請幫幫手!!
0
回復
